Dell Brocade 5100 Brocade 7.3.0 Fabric OS Message Reference Guide - Page 990

5 ZONE-1026 ZONE-1026 Message Message Type Severity Probable Cause Recommended Action port Out of CAM entries. LOG INFO Indicates that the total number of entries of S_ID CAM is above the limit while creating or adding a zone group. The maximum number of CAM entries allowed depends on the application-specific integrated circuit (ASIC). If hardware zoning enforcement is preferred, edit the zoning database to have zoned port IDs (PIDs) for that port. ZONE-1027 Message Message Type Severity Probable Cause Recommended Action Zoning transaction aborted . LOG INFO Indicates the zoning transaction was aborted because of a variety of potential errors. The error reason variable can be one of the following conditions: • Zone Merge Received: The fabric is in the process of merging two zone databases. • Zone Config update Received: The fabric is in the process of updating the zone database. • Bad Zone Config: The new configuration is not viable. • Zoning Operation failed: A zoning operation failed. • Shell exited: The command shell has exited. • Unknown: An error was received for an unknown reason. • User Command: A user aborted the current zoning transaction. • Switch Shutting Down: The switch is currently shutting down. Most of these error conditions are transitory. Try again after some time. Verify that only one administrator is modifying with the zone database at a time. 968 Fabric OS Message Reference 53-1003140-01