Dell Brocade 5100 Brocade 7.3.0 Fabric OS Message Reference Guide - Page 641

IPS-1001 5 IPS Messages IPS-1001 Message Message Type Severity Probable Cause Recommended Action FTR_AFA/FTR_AE License Not Installed (). LOG WARNING Indicates that either Advanced FICON Acceleration (FTR_AFA) or Advanced Extension (FTR_AE) license is not installed or assigned to the slot. Run the licenseShow command to verify the slot-based licenses are installed on the switch. Contact your switch supplier for an appropriate slot-based license. Run the licenseAdd and licenseSlotCfg commands to add the license to your switch and activate it. IPS-1002 Message Message Type Severity Probable Cause Recommended Action Failed to initialize rc = . LOG ERROR Indicates that the initialization of a module within the IPS daemon failed. Download a new firmware version using the firmwareDownload command. IPS-1003 Message Message Type Severity Probable Cause Recommended Action : Failed to allocate memory while performing . LOG WARNING Indicates that memory resources are low. This may be a transient problem. Check the memory usage on the switch using the memShow command. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Fabric OS Message Reference 619 53-1003140-01