Dell Brocade 5100 Brocade 7.3.0 Fabric OS Message Reference Guide - Page 705

NBFS-1001 5 NBFS Messages NBFS-1001 Message Message Type Severity Probable Cause Recommended Action Duplicate E_Port SCN from port in state (). LOG INFO Indicates a duplicate E_Port state change notification (SCN) was reported. The neighbor finite state machine (NBFSM) states are as follows: • 0 - Down • 1 - Init • 2 - Database Exchange • 3 - Database Acknowledge Wait • 4 - Database Wait • 5 - Full No action is required. NBFS-1002 Message Message Type Severity Probable Cause Recommended Action Wrong input: to neighbor FSM, state , port . FFDC | LOG ERROR Indicates the wrong input was sent to the neighbor finite state machine (NBFSM). NBFSM states are as follows: • 0 - Down • 1 - Init • 2 - Database Exchange • 3 - Database Acknowledge Wait • 4 - Database Wait • 5 - Full If this error occurs repeatedly, then there is a problem in the protocol implementation between two switches. Run the nbrStateShow command to check the neighbor state of the port listed in the message. If it is Full, then this message can safely be ignored. Otherwise, run the portDisable and portEnable commands to refresh the port. Fabric OS Message Reference 683 53-1003140-01