Dell Chromebook 11 3180 Disassembly and Reassembly Guide - For use by Certifie - Page 21

Installing display assembly, Display bezel, Removing display bezel

Get Dell Chromebook 11 3180 PDF manuals and user guides View all Dell Chromebook 11 3180 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Installing display assembly 1. Place the display assembly to align with the screw holders on the computer. 2. Replace the screws that secure the display hinges to the palm-rest assembly. 3. Flip over the computer. 4. Connect the display cable to the connector on the system board. 5. Place the metal bracket over the (display cable) connector, and tighten the M2.0x3.0 screws to secure the display cable to the computer. 6. Connect the WLAN cables. 7. Place the metal bracket, and tighten the M2.0x3.0 screw to the WLAN cable on the system board. 8. Install the: a. battery b. base cover c. microSD card 9. Follow the procedure in After working inside your computer. Display bezel Removing display bezel 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. microSD card b. base cover c. battery 3. Remove the hinge cap and the mylar cap that secures the display bezel to the display assembly [1,2]. 4. Remove the M2.5x3.5 screws and pry the edges to release the display bezel from the display assembly Disassembly and reassembly 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
Installing display assembly
1.
Place the display assembly to align with the screw holders on the computer.
2.
Replace the screws that secure the display hinges to the palm-rest assembly.
3.
Flip over the computer.
4.
Connect the display cable to the connector on the system board.
5.
Place the metal bracket over the (display cable) connector, and tighten the M2.0x3.0 screws to secure the display cable to the
computer.
6.
Connect the WLAN cables.
7.
Place the metal bracket, and tighten the M2.0x3.0 screw to the WLAN cable on the system board.
8.
Install the:
a.
battery
b.
base cover
c.
microSD card
9.
Follow the procedure in
After working inside your computer
.
Display bezel
Removing display bezel
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
microSD card
b.
base cover
c.
battery
3.
Remove the hinge cap and the mylar cap that secures the display bezel to the display assembly [1,2].
4.
Remove the M2.5x3.5 screws and pry the edges to release the display bezel from the display assembly
Disassembly and reassembly
21