Dell Chromebook 11 3180 Disassembly and Reassembly Guide - For use by Certifie - Page 7

Disassembly and reassembly, Recommended tools, microSD card, Removing microSD card

Get Dell Chromebook 11 3180 PDF manuals and user guides View all Dell Chromebook 11 3180 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

2 Disassembly and reassembly Recommended tools The procedures in this document require the following tools: • Phillips #0 screwdriver • Phillips #1 screwdriver • Plastic scribe NOTE: The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4 microSD card Removing microSD card 1. Follow the procedure in Before working inside your computer. 2. Press in on the microSD card to release it from the computer. 3. Remove the microSD card from the computer. Installing microSD card 1. Slide the SD card into its slot until it clicks into place. 2. Install the microSD card. 3. Follow the procedure in After working inside your computer. Base cover Removing base cover 1. Follow the procedure in Before working inside your computer. 2. Remove the microSD card. 3. To remove the base cover: a. Remove the mylar cap [1]. NOTE: The screw cover on the base cover is made up of a mylar sticker. To remove this screw, use a regular philips driver and puncture the mylar cover. Once the mylar caps are removed it cannot replaced, and the screws will be exposed from that point forward. b. Loosen the M2.5x7 captive screws that secure the base cover to the computer [2] . Disassembly and reassembly 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
Disassembly and reassembly
Recommended tools
The procedures in this document require the following tools:
•
Phillips #0 screwdriver
•
Phillips #1 screwdriver
•
Plastic scribe
NOTE:
The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4
microSD card
Removing microSD card
1.
Follow the procedure in
Before working inside your computer
.
2.
Press in on the microSD card to release it from the computer.
3.
Remove the microSD card from the computer.
Installing microSD card
1.
Slide the SD card into its slot until it clicks into place.
2.
Install the
microSD card
.
3.
Follow the procedure in
After working inside your computer
.
Base cover
Removing base cover
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
microSD card
.
3.
To remove the base cover:
a.
Remove the mylar cap [1].
NOTE:
The screw cover on the base cover is made up of a mylar sticker. To remove this screw, use a regular
philips driver and puncture the mylar cover. Once the mylar caps are removed it cannot replaced, and the screws
will be exposed from that point forward.
b.
Loosen the M2.5x7 captive screws that secure the base cover to the computer [2] .
2
Disassembly and reassembly
7