Dell Chromebook 3110 Service Manual - Page 26
Installing the keyboard
View all Dell Chromebook 3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Steps 1. Unroute the battery cable from the routing channels between the system board and 3-cell battery. 2. Disconnect the keyboard Flexible Printed Circuits (FPC) cable from the connector on the system board. 3. Place the system on a flat surface with the keyboard facing up. Open the system to 180 degrees. 4. Hold the sides of the palm-rest securely while pushing into the two release holes using a plastic scribe. 5. Use a plastic scribe to carefully pry the keyboard from the latches in the palm-rest assembly to release the keyboard from the keyboard bracket in the palm-rest assembly. 6. Lift and remove the keyboard from the palm-rest assembly and carefully pull the keyboard FPC cable through the gap on the palm-rest assembly. Installing the keyboard Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the keyboard and provide a visual representation of the installation procedure. 26 Removing and installing components