Dell Dimension 3100C Owner's Manual - Page 65
My Computer, Properties, General, When a message appears stating that memory size has changed - ram
View all Dell Dimension 3100C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
3 Align the notch on the bottom of the module with the crossbar in the connector. 3 2 1 4 1 cutouts (2) 2 memory module 3 notch 4 crossbar NOTICE: To avoid damage to the memory module, press the module straight down into the connector while you apply equal force to each end of the module. 4 Insert the module into the connector until the module snaps into position. If you insert the module correctly, the securing clips snap into the cutouts at each end of the module. 5 Replace the computer cover. See "Replacing the Computer Cover" on page 84. NOTICE: To connect a network cable, first plug the cable into the network port or device, and then plug it into the computer. 6 Connect your computer and devices to electrical outlets, and turn them on 7 When a message appears stating that memory size has changed, press to continue. 8 Log on to your computer. 9 Right-click the My Computer icon and click Properties. 10 Click the General tab. 11 To verify that the memory is installed correctly, check the amount of memory (RAM) listed. Removing and Installing Parts 65