Dell Dimension 3100C Owner's Manual - Page 85
when the cover is properly seated., Using the hinge tabs as leverage
View all Dell Dimension 3100C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
3 To replace the cover: a Align the bottom of the cover with the hinge tabs located along the bottom edge of the computer. b Using the hinge tabs as leverage, rotate the cover downward to close it. c Snap the cover into place by pulling back on the cover release latch and then releasing the latch when the cover is properly seated. d Ensure that the cover is seated correctly before moving the computer. NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer. 4 Connect your computer and devices to electrical outlets, and turn them on. 5 Ensure that the cover is seated correctly before setting the computer upright. NOTICE: To connect a network cable, first plug the cable into the network port or device, and then plug it into the computer. 6 Connect your computer and devices to electrical outlets, and turn them on. Removing and Installing Parts 85