Dell Dimension 3100C Owner's Manual - Page 78
Installing a Floppy Drive
View all Dell Dimension 3100C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Installing a Floppy Drive 1 If you are installing a new drive: a Use a small flat-edge screw driver on the back side of the drive-panel insert to gently pop off the insert. b Remove the four shoulder screws from the drive-panel insert. 2 If you are replacing an existing drive: Remove the four shoulder screws from the existing drive. 3 Insert the four shoulder screws into the sides of the new floppy drive and tighten them. 4 Attach the power and floppy-drive cables to the floppy drive. 5 Align the shoulder screws with the screw guides, and slide the drive into the bay until it clicks into place. 78 Removing and Installing Parts
78
Removing and Installing Parts
Installing a Floppy Drive
1
If you are installing a new drive:
a
Use a small flat-edge screw driver on the back side of the drive-panel insert to gently pop off the
insert.
b
Remove the four shoulder screws from the drive-panel insert.
2
If you are replacing an existing drive:
Remove the four shoulder screws from the existing drive.
3
Insert the four shoulder screws into the sides of the new floppy drive and tighten them.
4
Attach the power and floppy-drive cables to the floppy drive.
5
Align the shoulder screws with the screw guides, and slide the drive into the bay until it clicks into
place.