Dell E2209WFP Dell™ E2009W/E2209W Flat Panel Monitor User's Guide - Page 21
Horizontal Position, Vertical Position, Sharpness, Pixel Clock, Phase, Display Reset, Exit Menu
View all Dell E2209WFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Horizontal Position Vertical Position Sharpness Pixel Clock Push to go back to the main menu. Use the and buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+). NOTE: When using a DVI source, the Horizontal Position setting is not available. Use the and buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+). NOTE: When using a DVI source, the Vertical Position setting is not available. This feature can make the image look sharper or softer. Use or to adjust the sharpness from '0' to '100'. The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. Phase Display Reset Exit Menu OTHER SETTINGS Use the and buttons to adjust for best image quality. If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again. NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input. Reset the image to the original factory setting. Push to exit the OSD main menu. Back Language Menu Transparency Menu Timer Push to go back to the main menu. Language option to set the OSD display to one of seven languages (English, Espanol, Francais, Deutsch, Brazilian Portuguese, Japanese, or Simplified Chinese). This function is used to change the OSD background from opaque to transparent. OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button. Menu Lock Use the and buttons to adjust the slider in 1 second increments, from 5 to 60 seconds. Controls user access to adjustments. When 'Lock' is selected, no user adjustments are allowed. All buttons are locked except button. DDC/CI NOTE: When the OSD is locked, pressing the menu button will take the user directly to the OSD settings menu, with 'OSD Lock' pre-selected on entry. Press and hold button for 15 seconds to unlock and allow user access to all applicable settings. DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable via software on your PC. You can disable this feature by selecting "Disable". You can disable this feature by selecting Disable. The following warning message appears: Select Yes to disable DDC/CI and No to exit with out making changes.