Dell E2414H Dell r/Dell Users Guide - Page 11
Attaching the Cable Cover, Removing the Stand, Wall Mounting (Optional) - lcd monitor
View all Dell E2414H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Attaching the Cable Cover Wall Mounting (Optional) Removing the Stand NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a clean surface. NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions. To remove the stand: 1. Pleace the monitor on a flat surface. 2. Press and hold the Stand release button. 3. Lift the stand up and away from the monitor. 20 Setting Up the Monitor (Screw dimension: M4 x 10 mm). Refer to the instructions that come with the VESA-compatible base mounting kit. 1. Place the monitor panel on a soft cloth or cushion on stable, flat table. 2. Remove the stand. 3. Use a screwdriver to remove the four screws securing the plastic cover. 4. Attach the mounting bracket from the wall mounting kit to the LCD. 5. Mount the LCD on the wall by following the instructions that came with the wall mounting kit. NOTE: For use only with UL Listed Wall Mount Bracket with minimum weight/load bearing capacity of 3.0 kg. Setting Up the Monitor 21