Dell Equallogic PS6010 Storage Arrays - Hardware Owners Manual - Page 26

Installing the Bezel, Closing the Disk Drive Handle

Get Dell Equallogic PS6010 PDF manuals and user guides View all Dell Equallogic PS6010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

PS6010 Hardware Maintenance Maintaining Disks 1. Hold the disk drive by the plastic carrier, with the handle release button to the left, and slide the disk drive partially into a slot. 2. Press the handle release button to release the handle. Open the handle. 3. With the handle at an angle, slide the disk drive completely into the slot, simultaneously pushing in the handle until you hear a click. See Figure 2-7. Figure 2-7: Closing the Disk Drive Handle Verify that the new disk drive is operational by examining the LEDs on the front panel, as described in Interpreting Disk Drive LEDs on page 2-2. In addition, examine the GUI Member Disks window and the CLI member select show disks command output. Installing the Bezel After you install all the replacement disk drives or blanks, re-install and lock the bezel. 2-8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
PS6010 Hardware Maintenance
Maintaining Disks
2–8
1.
Hold the disk drive by the plastic carrier, with the handle release button to the
left, and slide the disk drive partially into a slot.
2.
Press the handle release button to release the handle. Open the handle.
3.
With the handle at an angle, slide the disk drive completely into the slot,
simultaneously pushing in the handle until you hear a click. See Figure 2-7.
Figure 2-7: Closing the Disk Drive Handle
Verify that the new disk drive is operational by examining the LEDs on the front
panel, as described in
Interpreting Disk Drive LEDs
on page 2-2. In addition,
examine the GUI Member Disks window and the CLI
member select show
disks
command output.
Installing the Bezel
After you install all the replacement disk drives or blanks, re-install and lock the
bezel.