Dell Force10 S25-01-GE-24V FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 1499
hardware monitor linecard, hardware monitor mac, hardware watchdog
View all Dell Force10 S25-01-GE-24V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1499 highlights
hardware monitor linecard e Configure the system to take an action upon a line card hardware error. Syntax hardware monitor linecard asic {btm [action-on-error {card-problem | card-reset | card-shutdown}] | fpc [action-on-error | parity-correction]} Parameters action-on-error btm fpc card-problem card-reset card-shutdown parity-correction Enter the keyword action-on-error to further specify actions that should be taken in the event of a hardware error. Enter the keyword btm to configure the system to take an action upon a Buffer Traffic Manager hardware error. Enter the keyword fpc to configure the system to take an action upon a Flexible Packet Classifier hardware error. Enter the keyword card-problem to place a line card in a card-problem state upon a hardware error. Enter the keyword card-reset to reset a line card upon a hardware error. Enter the keyword card-shutdown to shutdown a line card upon a hardware error. Enter the keyword parity-correction to enable automatic parity corrections for SRAM. The line card must be reloaded before the feature becomes operational. Defaults None Command Mode CONFIGURATION Command History Version 8.2.1.0 Introduced hardware monitor mac e Configure the system to shut down all ports on a line card upon a MAC hardware error. Syntax hardware monitor mac action-on-error port-shutdown Defaults None Command Mode CONFIGURATION Command History Version 8.2.1.0 Introduced hardware watchdog c Set the watchdog timer to trigger a reboot and restart the system. Syntax hardware watchdog Defaults Enabled C-Series Diagnostics and Debugging | 1499