Dell Force10 S50-01-GE-48T FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 1116

www.dell.com | support.dell.com show ip pim snooping neighbor ex Display information on PIM neighbors learned through PIM-SM snooping. Syntax show ip pim snooping neighbor [vlan vlan-id] Parameters vlan vlan-id (OPTIONAL) Enter a VLAN ID to display information about PIM neighbors that was discovered by PIM-SM snooping on a specified VLAN. Valid VLAN IDs: 1 to 4094. Command Modes EXEC EXEC Privilege Command History Example Version 8.4.1.1 Introduced on E-Series ExaScale Figure 42-9. show ip pim snooping neighbor Command Example Force10#show ip pim snooping neighbor Neighbor Address 165.87.32.2 165.87.32.10 165.87.32.12 Interface Vl 2 [Gi 4/13 ] Vl 2 [Gi 4/11 ] Vl 2 [Gi 4/20 ] Uptime/Expires Ver DR Prio 00:04:03/00:01:42 v2 1 00:00:46/00:01:29 v2 0 00:00:51/00:01:24 v2 0 Table 42-4. show ip pim snooping neighbor Command Example Fields Field Neighbor address Interface Uptime/expires Ver DR prio/Mode Description Displays the IP address of the neighbor learned through PIM-SM snooping. Displays the VLAN ID number and slot/port on which the PIM-SM-enabled neighbor was discovered. Displays the amount of time the neighbor has been up followed by the amount of time until the neighbor is removed from the multicast routing table (that is, until the neighbor hold time expires). Displays the PIM version number. • v2 = PIM version 2 Displays the Designated Router priority and the mode. • 1 = default Designated Router priority (use ip pim dr-priority) • DR = Designated Router • S = Sparse mode 1116 | PIM-Sparse Mode (PIM-SM)