Dell Force10 S50-01-GE-48T FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 1221

port-set portpipe number linecard all Enter the keyword port-set followed by the line card's port pipe number. Range: 0 or 1 (OPTIONAL) Enter the keywords linecard all to indicate all line cards. Defaults No default values or behavior Command Modes EXEC Command History Version 7.6.1.0 Version 7.4.1.0 Introduced on C-Series and S-Series Introduced on E-Series Example Figure 48-22. test cam-usage service-policy input policy-map linecard all Example Command Force10# test cam-usage service-policy input pmap_l2 linecard all For a L2 Input Policy Map pmap_l2, the output must be as follows, Linecard | Portpipe | CAM Partition | Available CAM | Estimated CAM | Status | | | | per Port | (Allowed ports) 0 0 0 1 1 0 1 1 13 1 Force10# L2ACL L2ACL L2ACL L2ACL L2ACL 500 100 1000 0 400 200 200 200 200 200 Allowed (2) Exception Allowed (5) Exception Allowed (2) Note: In a Layer 2 Policy Map, IPv4/IPv6 rules are not allowed and hence the output contains only L2ACL CAM partition entries. Table 48-7. test cam-usage Command Example Fields Field Linecard Portpipe CAM Partition Available CAM Description Indicates the line card slot number. Indicates the portpipe number. The CAM space where the rules are added. Indicates the free CAM space, in the partition, for the classification rules. Note: The CAM entries reserved for the default rules are not included in the Available CAM column; free entries, from the default rules space, can not be used as a policy map for the classification rules. Quality of Service (QoS) | 1221