Dell Inspiron 13 5310 Service Manual - Page 39
Steps, To avoid damaging the display
![]() |
View all Dell Inspiron 13 5310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Steps 1. Place the display assembly on a clean and flat surface with the display panel facing up. 2. Place the palm-rest and keyboard assembly under the display hinges. CAUTION: To avoid damaging the display, do not slide the palm-rest and keyboard assembly over the display assembly. 3. Close the left-display hinge and align the screw holes on the left-display hinge with the screw holes on the palm-rest and keyboard assembly. 4. Replace the screw (M2x3) that secures the left-display hinge to the palm-rest and keyboard assembly. 5. Replace the screw (M2x4) that secures the left-display hinge to the palm-rest and keyboard assembly. 6. Close the right-display hinge and align the screw holes on the right-display hinge with the screw holes on the system board. 7. Place the Type-C port-bracket on the palm-rest and keyboard assembly. 8. Align the screw holes on the Type-C port-bracket to the screw holes on the right-display hinge. 9. Replace the two screws (M2x4) that secure the Type-C port-bracket to the palm-rest and keyboard assembly. 10. Connect the display cable to the connector on the system board and close the latch. 11. Adhere the tape that secures the display-cable connector latch to the system board. 12. Place the display-cable bracket over the display-cable connector. 13. Align the screw hole on the display-cable bracket to the screw hole on the system board. Removing and installing components 39
![](/manual_guide/products/dell-inspiron-13-5310-service-manual-47fb323/39.png)