Dell Inspiron 14 5485 2-in-1 Inspiron 5485 2-in-1 Service Manual - Page 36
Replacing the heat sink, Procedure, Post-requisites
View all Dell Inspiron 14 5485 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
19 Replacing the heat sink WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. CAUTION: Incorrect alignment of the heat sink can damage the system board and processor. NOTE: If either the system board or the heat sink is replaced, use the thermal pad/paste provided in the kit to ensure that thermal conductivity is achieved. Procedure 1 Place the heat sink on the system board as illustrated, aligning the screw holes on the heat sink with the screw holes on the system board. 2 In sequential order (as indicated on the heat-sink), tighten the seven captive screws that secure the heat sink to the system board. NOTE: The number of screws may vary depending on the configuration ordered. Post-requisites Replace the base cover. 36 Replacing the heat sink