Dell Inspiron 14 5485 2-in-1 Inspiron 5485 2-in-1 Service Manual - Page 47
Replacing the wireless card, Procedure, Post-requisites, Antenna-cable color
![]() |
View all Dell Inspiron 14 5485 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
29 Replacing the wireless card WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure CAUTION: To avoid damage to the wireless card, do not place any cables under it. 1 Connect the antenna cables to the wireless card. 2 Align the notch on the wireless card with the tab on the wireless-card slot and slide the wireless card at an angle into the wireless-card slot. The following table provides the antenna-cable color scheme for the wireless card supported by your computer. Table 2. Antenna-cable color scheme Connectors on the wireless card Antenna-cable color Main (white triangle) White Auxiliary (black triangle) Black 3 Align the screw hole on the wireless-card bracket with the screw hole on the wireless card and the system board. 4 Replace the screw (M2x3) that secures the wireless-card bracket and wireless card to the system board. Post-requisites Replace the base cover. Replacing the wireless card 47
![](/manual_guide/products/dell-inspiron-14-5485-2in1-inspiron-5485-2in1-service-manual-e2d4d72/47.png)