Dell Inspiron 14 5485 2-in-1 Inspiron 5485 2-in-1 Service Manual - Page 41
Removing the I/O board, Prerequisites, Procedure, board cable from the I/O board.
![]() |
View all Dell Inspiron 14 5485 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
24 Removing the I/O board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites Remove the base cover. Procedure 1 Peel off the tape that secures the I/O-board cable to the palm-rest and keyboard assembly. 2 Open the latch, and disconnect the I/O-board cable from the I/O board. 3 Disconnect the fingerprint-reader board cable from the I/O board. 4 Remove the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly. 5 Lift the I/O board off the palm-rest and keyboard assembly. Removing the I/O board 41
![](/manual_guide/products/dell-inspiron-14-5485-2in1-inspiron-5485-2in1-service-manual-e2d4d72/41.png)