Dell Inspiron 14 5485 2-in-1 Inspiron 5485 2-in-1 Service Manual - Page 55
Open the latch, and disconnect the keyboard-backlight cable from the system board.
![]() |
View all Dell Inspiron 14 5485 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
5 Disconnect the power-adapter port cable from the system board. 6 Remove the two screws (M2x3) that secure the USB Type-C port bracket to the system board and palm-rest assembly. 7 Lift the USB Type-C port bracket off the system board. 8 Disconnect the speaker cable from the system board. 9 Open the latch, and disconnect the keyboard cable from the system board. 10 Open the latch, and disconnect the keyboard-backlight cable from the system board. 11 Open the latch, and disconnect the touchpad cable from the system board. 12 Open the latch, and disconnect the hard-drive cable from the system board. 13 Disconnect the coin-cell battery cable from the system board. Removing the system board 55
![](/manual_guide/products/dell-inspiron-14-5485-2in1-inspiron-5485-2in1-service-manual-e2d4d72/55.png)
5
Disconnect the power-adapter port cable from the system board.
6
Remove the two screws (M2x3) that secure the USB Type-C port bracket to the system board and palm-rest assembly.
7
Lift the USB Type-C port bracket
off
the system board.
8
Disconnect the speaker cable from the system board.
9
Open the latch, and disconnect the keyboard cable from the system board.
10
Open the latch, and disconnect the keyboard-backlight cable from the system board.
11
Open the latch, and disconnect the touchpad cable from the system board.
12
Open the latch, and disconnect the hard-drive cable from the system board.
13
Disconnect the coin-cell battery cable from the system board.
Removing the system board
55