Dell Inspiron 16 Plus 7630 Inspiron 16 Plus 7630 Owners Manual- NVIDIA GeForce - Page 46
Removing the M.2 2280 solid-state drive, Next steps, Prerequisites, About this task, Steps
View all Dell Inspiron 16 Plus 7630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Removing the M.2 2280 solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in Before working inside your computer. 2. Remove the base cover. About this task NOTE: This procedure applies only to computers shipped with an M.2 2280 solid-state drive installed. NOTE: The M.2 solid-state drive installed on your computer depends on the configuration ordered. The M.2 slot supports one of the following solid-state drives: ● M.2 2230 solid-state drive ● M.2 2280 solid-state drive The following image(s) indicate the location of the M.2 2280 solid-state drive and provides a visual representation of the removal procedure. Steps 1. Remove the screw (M2x3) that secures the M.2 thermal shield to the system board. 2. Slide and lift the M.2 thermal shield off the M.2 2280 solid-state drive. 3. Lift at an angle and remove the M.2 2280 solid-state drive from the M.2 solid-state drive slot on the system board. 46 Removing and installing Customer Replaceable Units (CRUs)