Dell Inspiron 16 Plus 7630 Inspiron 16 Plus 7630 Owners Manual- NVIDIA GeForce - Page 62
I/O board, Removing the I/O board
![]() |
View all Dell Inspiron 16 Plus 7630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Steps 1. Place the display assembly on a clean and flat surface with the display panel facing up. 2. Gently place the palm-rest and keyboard assembly on the display assembly. 3. Close the left display-assembly hinge and align its screw holes with the screw holes on the palm-rest and keyboard assembly. 4. Close the right display-assembly hinge and align its screw holes with the screw holes on the palm-rest and keyboard assembly. 5. Replace the two screws (M2.5x5.5) that secure the left display-assembly hinge to the palm-rest and keyboard assembly. 6. Replace the two screws (M2.5x5.5) that secure the right display-assembly hinge to the palm-rest and keyboard assembly. 7. Connect the display-assembly cable to its connector on the system board and close the latch. 8. Adhere the tape to secure the display-cable latch to its connector to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. I/O board Removing the I/O board CAUTION: The information in this section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in Before working inside your computer. 2. Remove the base cover. About this task The following image(s) indicate the location of the I/O board and provides a visual representation of the removal procedure. 62 Removing and installing Field Replaceable Units (FRUs)
![](/manual_guide/products/dell-inspiron-16-plus-7630-inspiron-16-plus-7630-owners-manual-nvidia-geforce-rtx-30504050-intel-graphics-6f75cc4/62.png)