Dell Inspiron 16 Plus 7630 Inspiron 16 Plus 7630 Owners Manual- NVIDIA GeForce - Page 70
Installing the power-adapter port, About this task, Steps
View all Dell Inspiron 16 Plus 7630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
About this task The following image(s) indicate the location of the power-adapter port and provides a visual representation of the removal procedure. Steps 1. Remove the two screws (M2.5x5.5) that secure the right display-assembly hinge to the system board. 2. Open the right display-assembly hinge at an angle of 90 degrees. 3. Peel the tape that secures the display-assembly cable latch to its connector on the system board. 4. Open the latch and disconnect the display-assembly cable from its connector on the system board. 5. Peel the tape that secures the power-adapter port cable to its connector on the system baord. 6. Disconnect the power-adapter port cable from its connector on the system board. 7. Peel the tape that secures the power-adpater port cable to the palm-rest and keybaord assembly. 8. Lift the power-adapter port and its cable off the palm-rest and keyboard assembly. Installing the power-adapter port CAUTION: The information in this section is intended for authorized service technicians only. 70 Removing and installing Field Replaceable Units (FRUs)