Dell Inspiron 27 7710 All-in-One Service Manual - Page 34
Retractable-camera assembly, Removing the retractable-camera assembly
View all Dell Inspiron 27 7710 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
3. Install the back cover. 4. Install the stand. 5. Follow the procedure in After working inside your computer. Retractable-camera assembly Removing the retractable-camera assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the stand. 3. Remove the back cover. 4. Remove the I/O cover. 5. Remove the system-board shield. About this task The following image indicates the location of the retractable-camera assembly and provides a visual representation of the removal procedure. Steps 1. Disconnect the camera cable from the system board. 2. Peel the tape that secures the camera cable to the display-assembly base. 3. Remove the camera cable from the routing guide on the display-assembly base. 4. Remove the two screws (M3x5) that secure the retractable-camera assembly to the display-assembly base. 5. Remove the retractable-camera assembly from the display-assembly base. 34 Removing and installing components