Dell Inspiron 27 7710 All-in-One Service Manual - Page 56
Installing the microphones, Prerequisites, About this task, Steps, Next steps
View all Dell Inspiron 27 7710 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Installing the microphones Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task The following image indicates the location of the microphones and provides a visual representation of the installation procedure. Steps 1. Align the microphone modules (2) with their slots on the display-assembly base. 2. Replace the four screws (M2X2.5) that secure the microphone modules to the display-assembly base. 3. Route the microphone cable through the routing guides on the display-assembly base . 4. Adhere the tape that secures the microphone cable to the display-assembly base. Next steps 1. Install the system board. 2. Install the media-card reader. 3. Install the heat sink. 4. Install the fan. 5. Install the wireless card. 6. Install the M.2 2230 solid-state drive or M.2 2280 solid-state drive. 7. Install the hard drive. 8. Install the memory module. 9. Install the system-board shield. 10. Install the I/O cover. 11. Install the back cover. 12. Install the stand. 13. Follow the procedure in After working inside your computer. 56 Removing and installing components