Dell Inspiron 27 7710 All-in-One Service Manual - Page 45
Power-button board, Removing the power-button board
View all Dell Inspiron 27 7710 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Steps 1. Place the media-card reader under the system board and then align the screw hole on the media-card reader with the screw hole on the display-assembly base. NOTE: Ensure that the media-card reader cable stays above the system board. 2. Connect the media-card reader cable to the system board and close the latch to secure the cable. 3. Replace the screw (M3x3.5) that secure the media-card reader to the display-assembly base. Next steps 1. Install the system-board shield. 2. Install the I/O cover. 3. Install the back cover. 4. Install the stand. 5. Follow the procedure in After working inside your computer. Power-button board Removing the power-button board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the stand. 3. Remove the back cover. 4. Remove the I/O cover. 5. Remove the system-board shield. About this task The following image indicates the location of the power-button board and provides a visual representation of the removal procedure. Removing and installing components 45