Dell Inspiron 3020 Small Desktop Service Manual - Page 25
Solid-state drive, Removing the M.2 2230 solid-state drive
View all Dell Inspiron 3020 Small Desktop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Steps 1. Align the notch on the memory module with the tab on the memory-module slot. 2. Press the memory module down until the memory module snaps into place and the securing clips lock in place. NOTE: Repeat Steps 1 and 2 to remove any other memory modules installed in your computer. Next steps 1. Install the hard-drive and optical-drive cage. 2. Install the 3.5-inch hard drive or 2.5-inch hard drive. 3. Install the front cover. 4. Install the left-side cover. 5. Follow the procedure in After working inside your computer. Solid-state drive Removing the M.2 2230 solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the left-side cover. 3. Remove the front cover. 4. Remove the 3.5-inch hard drive or 2.5-inch hard drive. 5. Remove the hard-drive and optical-drive cage. About this task The following image indicates the location of the M.2 2230 solid-state drive and provides a visual representation of the removal procedure. Steps 1. Remove the screw (M2x3) that secures the M.2 2230 solid-state drive to the system board. 2. Slide and lift the M.2 2230 solid-state drive from the M.2 card slot on the system board. Removing and installing components 25