Dell Inspiron 620 Service Manual - Page 38

Processor Information Processor Type Displays the processor type L2 Cache Displays the L2 cache size L3 Cache Displays the L3 cache size Memory Information Memory Installed Indicates the amount of memory installed in MB Memory Speed Indicates the memory speed in MHz Memory Technology Indicates the type of installed memory Memory Channel Indicates single channel or dual channel mode Device Information SATA 0 Displays the SATA drive connected to the SATA 0 connector SATA 1 Displays the SATA drive connected to the SATA 1 connector SATA 2 Displays the SATA drive connected to the SATA 2 connector SATA 3 Displays the SATA drive connected to the SATA 3 connector Advanced CPU Configuration Graphics Configuration System Configuration Power Management Post Behavior l Hyper-threading - Enabled or Disabled (Enabled by default) l Active Processor Cores - All; 1; 2; 3 (All by default) l Limit CPUID Value - Enabled or Disabled (Disabled by default) l CPU XD Support - Enabled or Disabled (Enabled by default) l Intel Virtualization Technology - Enabled or Disabled (Enabled by default) l Intel SpeedStep - Enabled or Disabled (Enabled by default) l Intel Turbo Boost Technology - Enabled or Disabled (Enabled by default) l CPU C6 Report - Enabled or Disabled (Enabled by default) l Intel Multiple Monitor Feature - Enabled or Disabled (Disabled by default) l Onboard Audio Controller - Enabled or Disabled (Enabled by default) l Onboard LAN Controller - Enabled or Disabled (Enabled by default) l Onboard LAN Boot ROM - Enabled or Disabled (Disabled by default) l SATA Mode - AHCI; RAID (AHCI by default) l USB Controller - Enabled or Disabled (Enabled by default) l USB Storage Boot Function - Enabled or Disabled (Enabled by default) l Onboard Card Reader - Enabled or Disabled (Enabled by default) l Onboard Serial Port - Enabled or Disabled (Enabled by default) l Serial Port IO Address/IRQ - 3F8h/IRQ4, 2F8h/IRQ3, 3E8h/IRQ4, 2E8h/IRQ3 (3F8h/IRQ4 by default) l Restore AC Power Loss - Power Off; Power On; Last State (Power Off by default) l Wake on LAN from S4/S5 - Enabled or Disabled (Disabled by default) l USB Powershare in S4/S5 State -Enabled or Disabled (Disabled by default) l USB Powershare in Sleep State - Normal; Enhanced (Normal by default) l Resume by PS/2 Devices - Enabled or Disabled (Enabled by default) l Auto Power On - Enabled or Disabled (Disabled by default) l Auto Power On Date - 0 to 31, 0 for everyday (15 by default) l Auto Power On Hour - 0 to 23 (12 by default) l Auto Power On Minute - 0 to 59 (30 by default) l Auto Power On Second - 0 to 59 (30 by default) l Bootup NumLock State - On; Off (On by default) l Keyboard Error Report - Enabled; Disabled (Enabled by default) Security Admin Password Allows to set, change, or delete the administrator password when the service tag is present System Password Boot Menu Security HDD Protection Feature NOTE: Deleting the administrator password will delete the system password. Hence, the administrator password must be set before setting the system password. Allows to set, change, or delete the system password when the service tag is present Enabled or Disabled User must enter Admin Password to access the F12 Boot Menu when this setting is enabled (Disabled by default) Enabled or Disabled (Disabled by default) Boot 1st Boot Priority 2nd Boot Priority Specifies the boot sequence from the available devices Hard Disk; CD/DVD; Network; USB Floppy; USB Hard Disk; USB CD/DVD; Disabled (Hard Disk by default) Specifies the boot sequence from the available devices Hard Disk; CD/DVD; Network; USB Floppy; USB Hard Disk; USB CD/DVD; Disabled (CD/DVD Drive by default)