Dell Inspiron Chromebook 11 3181 2-in-1 Inspiron 3181 2-in-1 Service Manual - Page 19

Installing speakers, Display assembly, Removing display assembly

Get Dell Inspiron Chromebook 11 3181 2-in-1 PDF manuals and user guides View all Dell Inspiron Chromebook 11 3181 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Installing speakers 1 Place the speakers into the slots on the computer. 2 Route the speaker cable through the retention clips through routing channel. 3 Affix the adhesive tape to secure the speaker cable on the computer. 4 Connect the speaker cable to the connector on the system board. 5 Install the: a battery b base cover c microSD card 6 Follow the procedure in After working inside your computer. Display assembly Removing display assembly 1 Follow the procedure in Before working inside your computer. 2 Remove the: a microSD card b base cover c battery 3 To remove cables: a Remove the screw M2.0xM3.0 and lift the metal bracket that secures the WLAN card on the system board [1, 2] b Disconnect the WLAN cables [3]. c Remove the screws M2.0xM3.0 and lift the metal bracket that secures the display cable on the computer [4, 5] Disassembly and reassembly 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
Installing speakers
1
Place the speakers into the slots on the computer.
2
Route the speaker cable through the retention clips through routing channel.
3
Affix
the adhesive tape to secure the speaker cable on the computer.
4
Connect the speaker cable to the connector on the system board.
5
Install the:
a
battery
b
base cover
c
microSD card
6
Follow the procedure in
After working inside your computer
.
Display assembly
Removing display assembly
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
microSD card
b
base cover
c
battery
3
To remove cables:
a
Remove the screw M2.0xM3.0 and lift the metal bracket that secures the WLAN card on the system board [1, 2]
b
Disconnect the WLAN cables [3].
c
Remove the screws M2.0xM3.0 and lift the metal bracket that secures the display cable on the computer [4, 5]
Disassembly and reassembly
19