Dell Inspiron Chromebook 11 3181 2-in-1 Inspiron 3181 2-in-1 Service Manual - Page 8

Installing microSD card, Base cover, Removing base cover

Get Dell Inspiron Chromebook 11 3181 2-in-1 PDF manuals and user guides View all Dell Inspiron Chromebook 11 3181 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

3 Remove the microSD card from the computer. Installing microSD card 1 Slide the SD card into its slot until it clicks into place. 2 Install the microSD card. 3 Follow the procedure in After working inside your computer. Base cover Removing base cover 1 Follow the procedure in Before working inside your computer. 2 Remove the microSD card. 3 To remove the base cover: a Remove the mylar cap [1]. NOTE: The screw cover on the base cover is made up of a mylar sticker. To remove this screw, use a regular philips driver and puncture the mylar cover. Once the mylar caps are removed it cannot replaced, and the screws will be exposed from that point forward. b Loosen the M2.5x7 captive screws that secure the base cover to the computer [2] . c Pry the base cover from the edge. NOTE: You may need a 3c plastic scribe to pry the base cover from the edge. 4 Lift the base cover away from the computer. 8 Disassembly and reassembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
3
Remove the microSD card from the computer.
Installing microSD card
1
Slide the SD card into its slot until it clicks into place.
2
Install the
microSD card
.
3
Follow the procedure in
After working inside your computer
.
Base cover
Removing base cover
1
Follow the procedure in
Before working inside your computer
.
2
Remove the
microSD card
.
3
To remove the base cover:
a
Remove the mylar cap [1].
NOTE:
The screw cover on the base cover is made up of a mylar sticker. To remove this screw, use a regular philips
driver and puncture the mylar cover. Once the mylar caps are removed it cannot replaced, and the screws will be
exposed from that point forward.
b
Loosen the M2.5x7 captive screws that secure the base cover to the computer [2] .
c
Pry the base cover from the edge.
NOTE:
You may need a 3c plastic scribe to pry the base cover from the edge.
4
Lift the base cover away from the computer.
8
Disassembly and reassembly