Dell Inspiron Chromebook 11 3181 2-in-1 Inspiron 3181 2-in-1 Service Manual - Page 9

Installing base cover, Battery, Removing battery - optional

Get Dell Inspiron Chromebook 11 3181 2-in-1 PDF manuals and user guides View all Dell Inspiron Chromebook 11 3181 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Installing base cover If the system is shipped with M.2 SSD perform the following steps. 1 Toe in the base cover front edge into the system. 2 Press the edges of the cover until it clicks into place. 3 Replace the M2.5x7 screws to secure the base cover to the computer. 4 Install the microSD card 5 Follow the procedure in After working inside your computer. Battery Removing battery - optional 1 Follow the procedure in Before working inside your computer. 2 Remove the: a microSD card b base cover 3 To remove the battery: a Disconnect the battery cable from the connector on the system board [1,2]. b Remove the M2.0x3.0 screws that secure the battery to the computer [3]. c Lift the battery away from the computer [4]. Disassembly and reassembly 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
Installing base cover
If the system is shipped with M.2 SSD perform the following steps.
1
Toe in the base cover front edge into the system.
2
Press the edges of the cover until it clicks into place.
3
Replace the M2.5x7 screws to secure the base cover to the computer.
4
Install the
microSD card
5
Follow the procedure in
After working inside your computer
.
Battery
Removing battery - optional
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
microSD card
b
base cover
3
To remove the battery:
a
Disconnect the battery cable from the connector on the system board [1,2].
b
Remove the M2.0x3.0 screws that secure the battery to the computer [3].
c
Lift the battery away from the computer [4].
Disassembly and reassembly
9