Dell Latitude 3190 2-in-1 Owners Manual - Page 23

Power switch board, Removing power switch board

Get Dell Latitude 3190 2-in-1 PDF manuals and user guides View all Dell Latitude 3190 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

4. Install the: a) battery b) base cover 5. Follow the procedure in After working inside your computer. Power switch board Removing power switch board 1. Follow the procedure in Before working inside your computer. 2. Remove the: a) base cover b) battery 3. To remove the power switch: a) Disconnect the power switch cable from the power switch board [1]. b) Remove the two M.2x3 screws that secure the power switch board on the computer [2]. c) Lift the power switch board away from the computer [3]. Installing power switch board 1. Align the screw hole on the power switch board with the screw holders on the slot of the computer. 2. Replace the two M2x3 screws that secure the power switch board to the computer. 3. Connect the power switch cable to the connector on the power switch board. 4. Install the: Disassembly and reassembly 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
4.
Install the:
a)
battery
b)
base cover
5.
Follow the procedure in
After working inside your computer
.
Power switch board
Removing power switch board
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a)
base cover
b)
battery
3.
To remove the power switch:
a)
Disconnect the power switch cable from the power switch board [1].
b)
Remove the two M.2x3 screws that secure the power switch board on the computer [2].
c)
Lift the power switch board away from the computer [3].
Installing power switch board
1.
Align the screw hole on the power switch board with the screw holders on the slot of the computer.
2.
Replace the two M2x3 screws that secure the power switch board to the computer.
3.
Connect the power switch cable to the connector on the power switch board.
4.
Install the:
Disassembly and reassembly
23