Dell Latitude 3190 2-in-1 Owners Manual - Page 33

Installing display assembly, Display back cover, Removing display back cover

Get Dell Latitude 3190 2-in-1 PDF manuals and user guides View all Dell Latitude 3190 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Installing display assembly 1. Place the display assembly to align with the screw holders on the computer at 90 degree with keyboard facing the table. 2. Replace the six M2.5x5 screws that secure the display hinges to the palm-rest assembly. 3. Flip over the computer. 4. Connect the display cable to the connector on the system board. 5. Place the display cable bracket over the display cable connector, and replace the M2x3 screws to secure the display cable to the computer. 6. Connect the WLAN cables. 7. Place the metal bracket on WLAN card, and replace the M2x3 screw to secure the metal bracket on the system board. 8. Install the: a) battery b) base cover 9. Follow the procedure in After working inside your computer. Display back cover Removing display back cover 1. Follow the procedure in Before working inside your computer. 2. Using a plastic scribe pry the upper edge of the display back cover and continue prying in clockwise direction throughout the outer edge of the display cover. Disassembly and reassembly 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Installing display assembly
1.
Place the display assembly to align with the screw holders on the computer at 90 degree with keyboard facing the table.
2.
Replace the six M2.5x5 screws that secure the display hinges to the palm-rest assembly.
3.
Flip over the computer.
4.
Connect the display cable to the connector on the system board.
5.
Place the display cable bracket over the display cable connector, and replace the M2x3 screws to secure the display cable to the
computer.
6.
Connect the WLAN cables.
7.
Place the metal bracket on WLAN card, and replace the M2x3 screw to secure the metal bracket on the system board.
8.
Install the:
a)
battery
b)
base cover
9.
Follow the procedure in
After working inside your computer
.
Display back cover
Removing display back cover
1.
Follow the procedure in
Before working inside your computer
.
2.
Using a plastic scribe pry the upper edge of the display back cover and continue prying in clockwise direction throughout the outer
edge of the display cover.
Disassembly and reassembly
33