Dell Latitude 3190 2-in-1 Owners Manual - Page 31

Installing speakers, Display assembly, Removing display assembly

Get Dell Latitude 3190 2-in-1 PDF manuals and user guides View all Dell Latitude 3190 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Installing speakers 1. Place the speakers into the slots on the computer. 2. Route the speaker cable through the retention clips through routing channel. 3. Affix the adhesive tape to secure the speaker cable on the computer. 4. Connect the speaker cable to the connector on the system board. 5. Install the: a) battery b) base cover 6. Follow the procedure in After working inside your computer. Display assembly Removing display assembly 1. Follow the procedure in Before working inside your computer. 2. Remove the: a) base cover b) battery 3. To remove cables: a) Remove the M2x3 screw [1] and lift the metal bracket that secures the WLAN card on the system board [2]. b) Disconnect the WLAN cables [3]. c) Remove the two M2x3 screws [4] and lift the metal bracket that secures the display cable on the computer [5]. d) Lift the latch, and disconnect the cable [6]. Disassembly and reassembly 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Installing speakers
1.
Place the speakers into the slots on the computer.
2.
Route the speaker cable through the retention clips through routing channel.
3.
Affix the adhesive tape to secure the speaker cable on the computer.
4.
Connect the speaker cable to the connector on the system board.
5.
Install the:
a)
battery
b)
base cover
6.
Follow the procedure in
After working inside your computer
.
Display assembly
Removing display assembly
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a)
base cover
b)
battery
3.
To remove cables:
a)
Remove the M2x3 screw [1] and lift the metal bracket that secures the WLAN card on the system board [2].
b)
Disconnect the WLAN cables [3].
c)
Remove the two M2x3 screws [4] and lift the metal bracket that secures the display cable on the computer [5].
d)
Lift the latch, and disconnect the cable [6].
Disassembly and reassembly
31