Dell Latitude 3190 2-in-1 Owners Manual - Page 38

Installing system board

Get Dell Latitude 3190 2-in-1 PDF manuals and user guides View all Dell Latitude 3190 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Installing system board 1. Align the system board with the screw holders on the palm rest assembly. 2. Replace the five M2x3 screws to secure the system board to the palm rest assembly. 3. Connect the display cable to the connector on the system board. 4. Place the metal bracket over the connector, and replace two M2x3 screws to secure the display cable to the system board. 5. Connect the WLAN cables. 6. Place the metal bracket on the WLAN card, and replace M2x3 screw to secure the WLAN cable on the WLAN card. 7. Place the metal bracket on the system board and replace two M2x3 screws to secure on the system board. 8. Connect the following cables: a) power connector cable b) touchpad cable c) keyboard cable d) speaker cable e) power board and audio cable f) coin cell battery cable g) world facing camera cable h) Replace the screw that secures the camera cable to the system board and affix the adhesive to secure the cable from the system board i) sensor cable 9. Install the: a) SSD card b) battery c) base cover 10. Follow the procedure in After working inside your computer. 38 Disassembly and reassembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Installing system board
1.
Align the system board with the screw holders on the palm rest assembly.
2.
Replace the five M2x3 screws to secure the system board to the palm rest assembly.
3.
Connect the display cable to the connector on the system board.
4.
Place the metal bracket over the connector, and replace two M2x3 screws to secure the display cable to the system board.
5.
Connect the WLAN cables.
6.
Place the metal bracket on the WLAN card, and replace M2x3 screw to secure the WLAN cable on the WLAN card.
7.
Place the metal bracket on the system board and replace two M2x3 screws to secure on the system board.
8.
Connect the following cables:
a)
power connector cable
b)
touchpad cable
c)
keyboard cable
d)
speaker cable
e)
power board and audio cable
f)
coin cell battery cable
g)
world facing camera cable
h)
Replace the screw that secures the camera cable to the system board and affix the adhesive to secure the cable from the system
board
i)
sensor cable
9.
Install the:
a)
SSD card
b)
battery
c)
base cover
10.
Follow the procedure in
After working inside your computer
.
38
Disassembly and reassembly