Dell Latitude 3190 2-in-1 Owners Manual - Page 29

Installing coin cell battery, Speaker, Removing speakers

Get Dell Latitude 3190 2-in-1 PDF manuals and user guides View all Dell Latitude 3190 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Installing coin cell battery 1. Place the coin cell battery into the slot on the computer. 2. Connect the coin cell battery cable to the connector on the system board. 3. Install the: a) battery b) base cover 4. Follow the procedure in After working inside your computer. Speaker Removing speakers 1. Follow the procedure in Before working inside your computer. 2. Remove the: a) base cover b) battery 3. To remove the speaker: NOTE: When removing the speaker, the audio daughter board FFC must be disconnected from the system board and then peeled back from the palm rest to unpeel the pieces of clear tape. a) Disconnect the speaker cable from the connector on the system board [1]. b) Remove the adhesive tapes that secure the speaker cable to the computer [2,3]. Disassembly and reassembly 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Installing coin cell battery
1.
Place the coin cell battery into the slot on the computer.
2.
Connect the coin cell battery cable to the connector on the system board.
3.
Install the:
a)
battery
b)
base cover
4.
Follow the procedure in
After working inside your computer
.
Speaker
Removing speakers
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a)
base cover
b)
battery
3.
To remove the speaker:
NOTE:
When removing the speaker, the audio daughter board FFC must be disconnected from the system board and
then peeled back from the palm rest to unpeel the pieces of clear tape.
a)
Disconnect the speaker cable from the connector on the system board [1].
b)
Remove the adhesive tapes that secure the speaker cable to the computer [2,3].
Disassembly and reassembly
29