Dell Latitude 5300 2-in-1 Service Manual - Page 31

WLAN card, Removing the WLAN card

Get Dell Latitude 5300 2-in-1 PDF manuals and user guides View all Dell Latitude 5300 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Next steps 1. Replace the battery. 2. Replace the base cover. 3. Replace the microSD card. 4. Follow the procedure in after working inside your computer. WLAN card Removing the WLAN card Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the base cover. 4. Remove the battery. Steps 1. Remove the single (M2x2) screw that secures the WLAN card bracket to the system board [1]. 2. Remove the WLAN card bracket that secures the WLAN antenna cables [2]. 3. Disconnect the WLAN antenna cables from the connectors on the WLAN card [3]. 4. Slide and lift the WLAN card away from the connector on the system board [4]. Disassembly and reassembly 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Next steps
1.
Replace the
battery
.
2.
Replace the
base cover
.
3.
Replace the
microSD card
.
4.
Follow the procedure in
after working inside your computer
.
WLAN card
Removing the WLAN card
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
microSD card
.
3.
Remove the
base cover
.
4.
Remove the
battery
.
Steps
1.
Remove the single (M2x2) screw that secures the WLAN card bracket to the system board [1].
2.
Remove the WLAN card bracket that secures the WLAN antenna cables [2].
3.
Disconnect the WLAN antenna cables from the connectors on the WLAN card [3].
4.
Slide and lift the WLAN card away from the connector on the system board [4].
Disassembly and reassembly
31