Dell Latitude 5300 2-in-1 Service Manual - Page 49
Installing the heatsink - UMA, DC-in port, Removing the DC-in port
View all Dell Latitude 5300 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Installing the heatsink - UMA Steps 1. Place the heatsink on the system board and align the screw holes on the heatsink with the screw holes on the system board [1]. 2. In sequential order (as indicated on the heatsink), tighten the four captive screws that secure the heatsink to the system board [2]. Next steps 1. Replace the battery. 2. Replace the base cover. 3. Replace the microSD card. 4. Follow the procedure in after working inside your computer. DC-in port Removing the DC-in port Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the base cover. 4. Remove the battery. Disassembly and reassembly 49
Installing the heatsink - UMA
Steps
1.
Place the heatsink on the system board and align the screw holes on the heatsink with the screw holes on the system board [1].
2.
In sequential order (as indicated on the heatsink), tighten the four captive screws that secure the heatsink to the system board [2].
Next steps
1.
Replace the
battery
.
2.
Replace the
base cover
.
3.
Replace the
microSD card
.
4.
Follow the procedure in
after working inside your computer
.
DC-in port
Removing the DC-in port
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
microSD card
.
3.
Remove the
base cover
.
4.
Remove the
battery
.
Disassembly and reassembly
49