Dell Latitude 5300 2-in-1 Service Manual - Page 65
Lift the latch and disconnect the eDP cable from the connector on the system board [5].
![]() |
View all Dell Latitude 5300 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
7. Peel the adhesive tape and disconnect the cable from the connector on the system board [1]. 8. Peel the adhesive tape that secures the eDP bracket [2]. 9. Remove the single (M2x4) screw that secures the eDP bracket to the system board [3]. 10. Remove the eDP bracket away from the computer [4]. 11. Lift the latch and disconnect the eDP cable from the connector on the system board [5]. Disassembly and reassembly 65
![](/manual_guide/products/dell-latitude-5300-2in1-service-manual-e5b2508/65.png)
7.
Peel the adhesive tape and disconnect the cable from the connector on the system board [1].
8.
Peel the adhesive tape that secures the eDP bracket [2].
9.
Remove the single (M2x4) screw that secures the eDP bracket to the system board [3].
10.
Remove the eDP bracket away from the computer [4].
11.
Lift the latch and disconnect the eDP cable from the connector on the system board [5].
Disassembly and reassembly
65