Dell Latitude 5300 2-in-1 Service Manual - Page 81
Replace the single M2x4 screw that secures the eDP cable bracket to the system board [4].
![]() |
View all Dell Latitude 5300 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
4. Connect the cable to the connector on the system board and adhere the adhesive tape [1]. 5. Reroute the eDP cable and connect it to the eDP connector [2]. 6. Place the eDP cable bracket on the system board [3]. 7. Replace the single (M2x4) screw that secures the eDP cable bracket to the system board [4]. Disassembly and reassembly 81
![](/manual_guide/products/dell-latitude-5300-2in1-service-manual-e5b2508/81.png)
4.
Connect the cable to the connector on the system board and adhere the adhesive tape [1].
5.
Reroute the eDP cable and connect it to the eDP connector [2].
6.
Place the eDP cable bracket on the system board [3].
7.
Replace the single (M2x4) screw that secures the eDP cable bracket to the system board [4].
Disassembly and reassembly
81