Dell Latitude 5300 2-in-1 Service Manual - Page 83
System board can be removed with heatsink attached., Steps
![]() |
View all Dell Latitude 5300 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
10. Remove the WWAN card. 11. Remove the system board. NOTE: System board can be removed with heatsink attached. 12. Remove the coin cell battery. Steps 1. Peel the adhesive tape securing the keyboard and the smartcard reader. 2. Lift the latch and disconnect the backlit cable and the keyboard cable from the connectors on the touchpad. Disassembly and reassembly 83
![](/manual_guide/products/dell-latitude-5300-2in1-service-manual-e5b2508/83.png)
10.
Remove the
WWAN card
.
11.
Remove the
system board
.
NOTE:
System board can be removed with heatsink attached.
12.
Remove the
coin cell battery
.
Steps
1.
Peel the adhesive tape securing the keyboard and the smartcard reader.
2.
Lift the latch and disconnect the backlit cable and the keyboard cable from the connectors on the touchpad.
Disassembly and reassembly
83