Dell Latitude 5300 2-in-1 Service Manual - Page 70
Adhere the adhesive tape to secure the eDP support bracket [5].
![]() |
View all Dell Latitude 5300 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
5. Connect the cable to the connector on the system board and adhere the adhesive tape [1]. 6. Connect the eDP cable to the connector on the system board [2]. 7. Place the eDP support bracket above the eDP connector [3]. 8. Replace the single (M2x4) screw to secure the eDP bracket to the system board [4]. 9. Adhere the adhesive tape to secure the eDP support bracket [5]. 70 Disassembly and reassembly
![](/manual_guide/products/dell-latitude-5300-2in1-service-manual-e5b2508/70.png)
5.
Connect the cable to the connector on the system board and adhere the adhesive tape [1].
6.
Connect the eDP cable to the connector on the system board [2].
7.
Place the eDP support bracket above the eDP connector [3].
8.
Replace the single (M2x4) screw to secure the eDP bracket to the system board [4].
9.
Adhere the adhesive tape to secure the eDP support bracket [5].
70
Disassembly and reassembly