Dell N3200-ON Open Networking Hardware Diagnostic Guide July 2022 - Page 25

PCI unit 0: Dev 0xb771, Rev 0x01, Chip BCM56771_A0, Driver BCM56770_A0, Adr=0x47: FW ID=v5.2.B Dell

Get Dell N3200-ON PDF manuals and user guides View all Dell N3200-ON manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

DELL PSU Temperature 34.3(C) PSU-1 Passed PSU-2 is not present Power Supply Test: Overall test results PASSED Show Optics in System Port # Name Status Type Part Number Rev Serial Number 49 SFP+ 1 REMOVED 50 SFP+ 2 REMOVED 51 SFP+ 3 REMOVED 52 SFP+ 4 REMOVED Error reading at offset 0x00 ERROR: i2c_read_tool[738]: ERROR: dev=0x50 adrs=0x00 (6): Not able to read all 256 bytes, read 0 53 QSFP28 1 PRESENTERROR: i2ctool_get[1055]: ERROR: FAILED

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
DELL PSU Temperature 34.3(C)
PSU-1
............................................
Passed
PSU-2
is not present
Power Supply Test: Overall test results------------- >>>> PASSED
Show Optics in System
Port #
Name
Status
Type
Part Number
Rev
Serial Number
------
------------
------
------- ---------------
---
---------------
49
SFP+ 1
REMOVED
50
SFP+ 2
REMOVED
51
SFP+ 3
REMOVED
52
SFP+ 4
REMOVED
Error reading at offset 0x00
ERROR: i2c_read_tool[738]: ERROR: dev=0x50 adrs=0x00 (6): Not able to read all 256
bytes, read 0
53
QSFP28 1
PRESENTERROR: i2ctool_get[1055]: ERROR: FAILED <<<---
Error Reading from I2C
Error reading at offset 0x00
ERROR: i2c_read_tool[738]: ERROR: dev=0x50 adrs=0x00 (6): Not able to read all 256
bytes, read 0
ERROR: i2ctool_get[1055]: ERROR: FAILED <<<---
Error Reading from I2C
ERROR: get_optics_reg[3904]: ERROR: /dev/i2c-1 0x50 0x0 256
Failed, rc = 65280
UnknownNot supported optic type 0
Error reading at offset 0x00
ERROR: i2c_read_tool[738]: ERROR: dev=0x50 adrs=0x00 (6): Not able to read all 256
bytes, read 0
54
QSFP28 2
PRESENTERROR: i2ctool_get[1055]: ERROR: FAILED <<<---
Error Reading from I2C
Error reading at offset 0x00
ERROR: i2c_read_tool[738]: ERROR: dev=0x50 adrs=0x00 (6): Not able to read all 256
bytes, read 0
ERROR: i2ctool_get[1055]: ERROR: FAILED <<<---
Error Reading from I2C
ERROR: get_optics_reg[3904]: ERROR: /dev/i2c-1 0x50 0x0 256
Failed, rc = 65280
UnknownNot supported optic type 0
Testing Memory Regions:
Testing Memory Region 0:
Address Read Test
.........................................
Passed
Address Write Test
........................................
Passed
Address Walking 1's Test
..................................
Passed
Address Walking 0's Test
..................................
Passed
Data Read Test
............................................
Passed
Data Write Test
...........................................
Passed
Data Walking 1's Test
.....................................
Passed
Data Walking 0's Test
.....................................
Passed
Data Sliding 1's Test
.....................................
Passed
Data Sliding 0's Test
.....................................
Passed
Data Pattern Test
.........................................
Passed
Memory: Overall test results------------------ >>>> PASSED
MAC Addr Test: Overall test results------------------ >>>> PASSED
Mounted Filesystem Devices:
/dev/mmcblk0p2 / ext4
rmmod: ERROR: Module linux_user_bde is not currently loaded
rmmod: ERROR: Module linux_kernel_bde is not currently loaded
DMA pool size: 33554432
PCI unit 0: Dev 0xb771, Rev 0x01, Chip BCM56771_A0, Driver BCM56770_A0
sysconf_probe successful
global_sal_config successful
***
1 BCM devices are detected
SOC unit 0 attached to PCI device BCM56771_A0
Loading M0 Firmware located at /etc/dn/diag/linkscan_led_fw.bin
Loading M0 Firmware located at /etc/dn/diag/custom_led.bin
Adr=0x47: FW ID=v5.2.B Dell
<platform>
060519 14:27:55 Version=0.0 ROM ID=0
Adr=0x46: FW ID=v5.2.B Dell
<platform>
060519 14:27:55 Version=0.0 ROM ID=0
Adr=0x45: FW ID=v5.2.B Dell
<platform>
060519 14:27:55 Version=0.0 ROM ID=0
.
.
Dell DIAG-OS tools
25