Dell N3200-ON Open Networking Hardware Diagnostic Guide July 2022 - Page 78

CPLD update: N2200-ON and N3200-ON/E3200-ON Series Only, platform

Get Dell N3200-ON PDF manuals and user guides View all Dell N3200-ON manuals
Add to My Manuals
Save this manual to your list of manuals

Page 78 highlights

Warning: Setting Bios Control at 0xdc from 0xaa to 0x89 failed. New value is 0xaa. Warning: SPI Configuration Lockdown activated. FREG2: Warning: Management Engine region (0x00001000-0x01595fff) is locked. Not all flash regions are freely accessible by flashrom. This is most likely due to an active ME. Please see http://flashrom.org/ME for details. PR0: Warning: 0x01860000-0x01e6efff is read-only. PR1: Warning: 0x01e70000-0x01ffffff is read-only. Enabling hardware sequencing because some important opcode is locked. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED. write BIOS image success Update BIOS image success root@dellemc-diag-os:~# CPLD update: N2200-ON and N3200-ON/E3200-ON Series Only root@dellemc-diag-os:~# ifconfig eth0 xxx.xxx.xx.xx root@dellemc-diag-os:~# route add default gw xxx.xxx.xx.xxx root@dellemc-diag-os:~# root@dellemc-diag-os:~# ping xx.xx.xxx.xxx PING 10.16.127.142 (10.16.127.142) 56(84) bytes of data. 64 bytes from 10.16.127.142: icmp_seq=1 ttl=62 time=0.116 ms 64 bytes from 10.16.127.142: icmp_seq=2 ttl=62 time=0.127 ms 64 bytes from 10.16.127.142: icmp_seq=3 ttl=62 time=0.099 ms 64 bytes from 10.16.127.142: icmp_seq=4 ttl=62 time=0.097 ms 64 bytes from 10.16.127.142: icmp_seq=5 ttl=62 time=0.099 ms 64 bytes from 10.16.127.142: icmp_seq=6 ttl=62 time=0.096 ms ^C --- xx.xx.xxx.xxx ping statistics --24 packets transmitted, 24 received, 0% packet loss, time 23587ms rtt min/avg/max/mdev = 0.093/0.106/0.140/0.016 ms root@dellemc-diag-os:~# root@dellemc-diag-os:~# scp @xx.xx.xxx.xxx://sites/maa/work/tftpboot/users// _cpu_rev_00_03.vme . Password: _cpu_rev_00_03.vme 100% 262KB 262.3KB/s 00:00 root@dellemc-diag-os:~# root@dellemc-diag-os:~# updatetool --dev=CPU_CPLD --update --file=_cpu_rev_00_03.vme Write image to CPU_CPLD Lattice Semiconductor Corp. ispVME(tm) V12.2 Copyright 1998-2011. For daisy chain programming of all in-system programmable devices TDI:41,TCK:43,TMS:42,WE:7,TRST:-1,TDO:44,SelPin:-1, Freq:1500 g_CoresiIspPins Init= 0 g_SussiIspPins Init= 0 g_WEAssertLevel= 0 TDI:41,TCK:43,TMS:42,WE:7,TRST:-1,TDO:44,SelPin:-1, Freq:1500 g_CoresiIspPins Init= 0 g_SussiIspPins Init= 0 g_WEAssertLevel= 0 TDI:41,TCK:43,TMS:42,WE:7,TRST:-1,TDO:44,SelPin:-1, Freq:1500 g_CoresiIspPins Init= 0 g_SussiIspPins Init= 0 g_WEAssertLevel= 0 Processing virtual machine file (_cpu_rev_00_03.vme)...... Diamond Deployment Tool 3.10 CREATION DATE: Tue Jan 08 13:11:21 2019 +=======+ | PASS write CPU_CPLD image success Update CPU_CPLD image success root@dellemc-diag-os:~# 78 Dell DIAG-OS tools

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
Warning: Setting Bios Control at 0xdc from 0xaa to 0x89 failed.
New value is 0xaa.
Warning: SPI Configuration Lockdown activated.
FREG2: Warning: Management Engine region (0x00001000-0x01595fff) is locked.
Not all flash regions are freely accessible by flashrom. This is most likely
due to an active ME. Please see http://flashrom.org/ME for details.
PR0: Warning: 0x01860000-0x01e6efff is read-only.
PR1: Warning: 0x01e70000-0x01ffffff is read-only.
Enabling hardware sequencing because some important opcode is locked.
Erasing and writing flash chip... Erase/write done.
Verifying flash... VERIFIED.
write BIOS image success
Update BIOS image success
root@dellemc-diag-os:~#
CPLD update: N2200-ON and N3200-ON/E3200-ON Series Only
root@dellemc-diag-os:~# ifconfig eth0 xxx.xxx.xx.xx
root@dellemc-diag-os:~# route add default gw xxx.xxx.xx.xxx
root@dellemc-diag-os:~#
root@dellemc-diag-os:~# ping xx.xx.xxx.xxx
PING 10.16.127.142 (10.16.127.142) 56(84) bytes of data.
64 bytes from 10.16.127.142: icmp_seq=1 ttl=62 time=0.116 ms
64 bytes from 10.16.127.142: icmp_seq=2 ttl=62 time=0.127 ms
64 bytes from 10.16.127.142: icmp_seq=3 ttl=62 time=0.099 ms
64 bytes from 10.16.127.142: icmp_seq=4 ttl=62 time=0.097 ms
64 bytes from 10.16.127.142: icmp_seq=5 ttl=62 time=0.099 ms
64 bytes from 10.16.127.142: icmp_seq=6 ttl=62 time=0.096 ms
^C
--- xx.xx.xxx.xxx ping statistics ---
24 packets transmitted, 24 received, 0% packet loss, time 23587ms
rtt min/avg/max/mdev = 0.093/0.106/0.140/0.016 ms
root@dellemc-diag-os:~#
root@dellemc-diag-os:~# scp <
name
>@xx.xx.xxx.xxx://sites/maa/work/tftpboot/users/<
name
>/
<
platform
>_cpu_rev_00_03.vme .
Password:
<
platform
>_cpu_rev_00_03.vme
100%
262KB 262.3KB/s
00:00
root@dellemc-diag-os:~#
root@dellemc-diag-os:~# updatetool --dev=CPU_CPLD --update --file=_cpu_rev_00_03.vme
Write image to CPU_CPLD
Lattice Semiconductor Corp.
ispVME(tm) V12.2 Copyright 1998-2011.
For daisy chain programming of all in-system programmable devices
TDI:41,TCK:43,TMS:42,WE:7,TRST:-1,TDO:44,SelPin:-1, Freq:1500
g_CoresiIspPins Init= 0 g_SussiIspPins Init= 0 g_WEAssertLevel= 0
TDI:41,TCK:43,TMS:42,WE:7,TRST:-1,TDO:44,SelPin:-1, Freq:1500
g_CoresiIspPins Init= 0 g_SussiIspPins Init= 0 g_WEAssertLevel= 0
TDI:41,TCK:43,TMS:42,WE:7,TRST:-1,TDO:44,SelPin:-1, Freq:1500
g_CoresiIspPins Init= 0 g_SussiIspPins Init= 0 g_WEAssertLevel= 0
Processing virtual machine file (
<platform>
_cpu_rev_00_03.vme)
......
Diamond Deployment Tool 3.10
CREATION DATE: Tue Jan 08 13:11:21 2019
+=======+
| PASS! |
+=======+
write CPU_CPLD image success
Update CPU_CPLD image success
root@dellemc-diag-os:~#
78
Dell DIAG-OS tools