Dell N3200-ON Open Networking Hardware Diagnostic Guide July 2022 - Page 6
Overview, Boot processes, POST, Capture support data from ONIE
View all Dell N3200-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2 Overview When the diagnostic tools finish, your system displays pass or fail test results. If all tests pass, the diagnostic tools exit normally. If a test fails, each diagnostic tool offers a different result. NOTE: For more information, see the README files that are associated with your platform. NOTE: To download the Release Notes, go to www.dell.com/support. The N2200-ON and N3200-ON/E3200-ON Series switches use the power-on self-test (POST) diagnostic tool that automatically runs during the system power-on at the BIOS level. This tool tests for catastrophic hardware failures that prevent booting the system. The error code is saved in CMOS for the next boot. There is no physical alarm indication. ONIE expansion for N2200-ON and N3200-ON/E3200-ON Series switches To view all the ONIE commands available, first select ONIE from the main menu. Then from the ONIE prompt, enter onie- and click twice. ONIE:/ # onie- onie-boot-mode onie-fwpkg onie-console onie-nos-install onie-discovery-start onie-self-update onie-discovery-stop onie-support onie-syseeprom onie-sysinfo onie-uninstaller Topics: • Boot processes • POST • Capture support data from ONIE • View system information Boot processes After the BIOS, for the N2200-ON and N3200-ON/E3200-ON Series, POST runs to verify the devices that are required to boot to ONIE GRUB. POST POST diagnostics verify the system DRAM, DIMM, SPD, memory, RTC/NVRAM, and PCI devices. Test configuration parameters and test results are saved in NVRAM. Capture support data from ONIE 1. Capture support data to the screen. ONIE:/ # dmesg 2. Capture support data to the onie-support.tar.bz2 gzip file. ONIE-support creates the support file. To store the file, enter the location; for example, ONIE:/# onie-support/tmp. 6 Overview