Dell N3200-ON Open Networking Hardware Diagnostic Guide July 2022 - Page 65
poetool, Tests
![]() |
View all Dell N3200-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
CPLD4: SW_SCRATCH Passed SMF_FPGA Passed PL Tool: Overall test results ---- >>> Passed poetool To use the poetool, connect ports 1/13/25/37 to the device. NOTE: The N2200-ON and N3200-ON/E3200-ON Series platforms do not support this tool. Tests To enable POE+ power before testing, use the following poetool command: Command: i2ctool -w -b /dev/i2c-0 -a 0x28 -R 0xe -V 0xff ● Command 1: poetool -i This command is initial poetool. ● Command 2: poetool -s -p 0 -m af_mode This sets the af mode. ● Command 3: poetool -g -P This is the read value. DIAG:/ # poetool -v DellEmc Diag poetool - version x.x package x.xx.x.x-x 2018/02/08 DIAG:/ # i2ctool -w -b /dev/i2c-0 -a 0x28 0-R 0xe -V 0xff DIAG:/ # i2ctool -r -b /dev/i2c-0 -a 0x28 0-R 0xe [0000000e]: 0xff || . DIAG:/ # poetool -i DIAG:/ # poetool -s -p 0 -m disable DIAG:/ # poetool -g -P Port 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 Power 13.5 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 13.5 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 13.5 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 13.5 Dell DIAG-OS tools 65
![](/manual_guide/products/dell-powerswitch-n3248teon-open-networking-hardware-diagnostic-guide-2022-8e7295c/65.png)