Dell N3200-ON Open Networking Hardware Diagnostic Guide July 2022 - Page 77

BIOS update: N2200-ON and N3200-ON/E3200-ON Series Only, >_&lt, >-BIOS-x.xx.x.x-x/&lt

Get Dell N3200-ON PDF manuals and user guides View all Dell N3200-ON manuals
Add to My Manuals
Save this manual to your list of manuals

Page 77 highlights

root@dellemc-diag- BIOS update: N2200-ON and N3200-ON/E3200-ON Series Only root@dellemc-diag-os:~# ifconfig eth0 xxx.xxx.xx.xx root@dellemc-diag-os:~# route add default gw xxx.xxx.xx.xxx root@dellemc-diag-os:~# ping xx.xx.x.xx PING xx.xx.x.xx (10.14.1.92) 56(84) bytes of data. 64 bytes from xx.xx.x.xx: icmp_seq=1 ttl=56 time=224 ms 64 bytes from xx.xx.x.xx: icmp_seq=2 ttl=56 time=224 ms 64 bytes from xx.xx.x.xx: icmp_seq=3 ttl=56 time=224 ms 64 bytes from xx.xx.x.xx: icmp_seq=4 ttl=56 time=224 ms 64 bytes from xx.xx.x.xx: icmp_seq=5 ttl=56 time=224 ms ^C --- xx.xx.x.xx ping statistics --5 packets transmitted, 5 received, 0% packet loss, time 4003ms rtt min/avg/max/mdev = 224.076/224.196/224.369/0.530 ms root@dellemc-diag-os:~# root@dellemc-diag-os:~# scp @xx.xx.x.xx://work//archive1/sw/BIOS/_/ -BIOS-x.xx.x.x-x/-BIOS-x.xx.x.x-x.bin . Password: -BIOS-x.xx.x.x-x.bin 100% 32MB 468.1KB/s 01:10 root@dellemc-diag-os:~# root@dellemc-diag-os:~# updatetool --dev=BIOS --update --file=-BIOS-x.xx.x.x-x.bin Read device:BIOS backup file Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0xaa to 0x89 failed. New value is 0xaa. Warning: SPI Configuration Lockdown activated. FREG2: Warning: Management Engine region (0x00001000-0x01595fff) is locked. Not all flash regions are freely accessible by flashrom. This is most likely due to an active ME. Please see http://flashrom.org/ME for details. PR0: Warning: 0x01860000-0x01e6efff is read-only. PR1: Warning: 0x01e70000-0x01ffffff is read-only. Enabling hardware sequencing because some important opcode is locked. Reading flash... done. Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0xaa to 0x89 failed. New value is 0xaa. Warning: SPI Configuration Lockdown activated. FREG2: Warning: Management Engine region (0x00001000-0x01595fff) is locked. Not all flash regions are freely accessible by flashrom. This is most likely due to an active ME. Please see http://flashrom.org/ME for details. PR0: Warning: 0x01860000-0x01e6efff is read-only. PR1: Warning: 0x01e70000-0x01ffffff is read-only. Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0xaa to 0x89 failed. New value is 0xaa. Warning: SPI Configuration Lockdown activated. FREG2: Warning: Management Engine region (0x00001000-0x01595fff) is locked. Not all flash regions are freely accessible by flashrom. This is most likely due to an active ME. Please see http://flashrom.org/ME for details. PR0: Warning: 0x01860000-0x01e6efff is read-only. PR1: Warning: 0x01e70000-0x01ffffff is read-only. Erase current image Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0xaa to 0x89 failed. New value is 0xaa. Warning: SPI Configuration Lockdown activated. FREG2: Warning: Management Engine region (0x00001000-0x01595fff) is locked. Not all flash regions are freely accessible by flashrom. This is most likely due to an active ME. Please see http://flashrom.org/ME for details. PR0: Warning: 0x01860000-0x01e6efff is read-only. PR1: Warning: 0x01e70000-0x01ffffff is read-only. Enabling hardware sequencing because some important opcode is locked. Erasing and writing flash chip... Erase/write done. Write image to BIOS Warning: BIOS region SMM protection is enabled! Dell DIAG-OS tools 77

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
root@dellemc-diag-
BIOS update: N2200-ON and N3200-ON/E3200-ON Series Only
root@dellemc-diag-os:~# ifconfig eth0 xxx.xxx.xx.xx
root@dellemc-diag-os:~# route add default gw xxx.xxx.xx.xxx
root@dellemc-diag-os:~# ping xx.xx.x.xx
PING xx.xx.x.xx (10.14.1.92) 56(84) bytes of data.
64 bytes from xx.xx.x.xx: icmp_seq=1 ttl=56 time=224 ms
64 bytes from xx.xx.x.xx: icmp_seq=2 ttl=56 time=224 ms
64 bytes from xx.xx.x.xx: icmp_seq=3 ttl=56 time=224 ms
64 bytes from xx.xx.x.xx: icmp_seq=4 ttl=56 time=224 ms
64 bytes from xx.xx.x.xx: icmp_seq=5 ttl=56 time=224 ms
^C
--- xx.xx.x.xx ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4003ms
rtt min/avg/max/mdev = 224.076/224.196/224.369/0.530 ms
root@dellemc-diag-os:~#
root@dellemc-diag-os:~# scp <
name
>@xx.xx.x.xx://work//archive1/sw/BIOS/<
platform
>_<
platform
>/
<
platform
>-BIOS-x.xx.x.x-x/<
platform
>-BIOS-x.xx.x.x-x.bin
.
Password:
<
platform
>-BIOS-x.xx.x.x-x.bin
100%
32MB 468.1KB/s
01:10
root@dellemc-diag-os:~#
root@dellemc-diag-os:~# updatetool --dev=BIOS --update --file=<
platform
>-BIOS-x.xx.x.x-x.bin
Read device:BIOS backup file
Warning: BIOS region SMM protection is enabled!
Warning: Setting Bios Control at 0xdc from 0xaa to 0x89 failed.
New value is 0xaa.
Warning: SPI Configuration Lockdown activated.
FREG2: Warning: Management Engine region (0x00001000-0x01595fff) is locked.
Not all flash regions are freely accessible by flashrom. This is most likely
due to an active ME. Please see http://flashrom.org/ME for details.
PR0: Warning: 0x01860000-0x01e6efff is read-only.
PR1: Warning: 0x01e70000-0x01ffffff is read-only.
Enabling hardware sequencing because some important opcode is locked.
Reading flash... done.
Warning: BIOS region SMM protection is enabled!
Warning: Setting Bios Control at 0xdc from 0xaa to 0x89 failed.
New value is 0xaa.
Warning: SPI Configuration Lockdown activated.
FREG2: Warning: Management Engine region (0x00001000-0x01595fff) is locked.
Not all flash regions are freely accessible by flashrom. This is most likely
due to an active ME. Please see http://flashrom.org/ME for details.
PR0: Warning: 0x01860000-0x01e6efff is read-only.
PR1: Warning: 0x01e70000-0x01ffffff is read-only.
Warning: BIOS region SMM protection is enabled!
Warning: Setting Bios Control at 0xdc from 0xaa to 0x89 failed.
New value is 0xaa.
Warning: SPI Configuration Lockdown activated.
FREG2: Warning: Management Engine region (0x00001000-0x01595fff) is locked.
Not all flash regions are freely accessible by flashrom. This is most likely
due to an active ME. Please see http://flashrom.org/ME for details.
PR0: Warning: 0x01860000-0x01e6efff is read-only.
PR1: Warning: 0x01e70000-0x01ffffff is read-only.
Erase current image
Warning: BIOS region SMM protection is enabled!
Warning: Setting Bios Control at 0xdc from 0xaa to 0x89 failed.
New value is 0xaa.
Warning: SPI Configuration Lockdown activated.
FREG2: Warning: Management Engine region (0x00001000-0x01595fff) is locked.
Not all flash regions are freely accessible by flashrom. This is most likely
due to an active ME. Please see http://flashrom.org/ME for details.
PR0: Warning: 0x01860000-0x01e6efff is read-only.
PR1: Warning: 0x01e70000-0x01ffffff is read-only.
Enabling hardware sequencing because some important opcode is locked.
Erasing and writing flash chip... Erase/write done.
Write image to BIOS
Warning: BIOS region SMM protection is enabled!
Dell DIAG-OS tools
77