Dell OptiPlex 5055 Ryzen CPU Tower OptiPlex 5055 Tower Owners Manual - Page 30
Installing optical drive, M.2 PCIe SSD, Removing optional M.2 PCIe SSD
![]() |
View all Dell OptiPlex 5055 Ryzen CPU Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Installing optical drive 1. Insert the optical drive into the optical drive bay until it clicks into place. 2. Open the Front panel door. 3. Route the data cable and power cable under the drive cage. 4. Connect the data cable and power cable to the connectors on the optical drive. 5. Close the front panel door. 6. Install the: a) Front bezel b) Side Cover 7. Follow the procedure in After working inside your computer. M.2 PCIe SSD Removing optional M.2 PCIe SSD 1. Follow the procedure in Before working inside your computer. 2. Remove the: a) Side Cover b) Front bezel 3. Open the Front panel door. 4. To remove the M.2 PCIe SSD: a) Pull the blue plastic tab that secures the M.2 PCIe SSD to the system board [1]. b) Slide the M.2 PCIe SSD from the connector on the system board [2]. 30 Field service information
![](/manual_guide/products/dell-optiplex-5055-ryzen-cpu-optiplex-5055-tower-owners-manual-94da5bf/30.png)