Dell OptiPlex 5055 Ryzen CPU Tower OptiPlex 5055 Tower Owners Manual - Page 34
Installing PCIe expansion card, To remove the PCIe brackets 2 and 4
View all Dell OptiPlex 5055 Ryzen CPU Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
5. Pull the release latch backward to open. 6. Insert a screwdriver in the hole of a PCIe bracket and push hard to release the bracket [2], and then lift the bracket out from your computer. NOTE: To remove the PCIe brackets (2 and 4), push the bracket upwards from the inside of your computer to release it and then lift the bracket away from your computer. 7. Repeat the steps to remove any additional PCIe expansion cards. Installing PCIe expansion card 1. Insert the PCIe expansion card to the connector on the system board. 2. Secure the PCIe expansion card by pushing the card retention latch until it clicks into place. 3. Repeat the steps to install any additional PCIe expansion cards. 4. Close the release latch. 5. Close the front panel door. 6. Install the: a) Front bezel b) Side Cover 7. Follow the procedure in After working inside your computer. 34 Field service information