Dell OptiPlex 5055 Ryzen CPU Tower OptiPlex 5055 Tower Owners Manual - Page 37
Installing intrusion switch, Power switch, Removing power switch
View all Dell OptiPlex 5055 Ryzen CPU Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
4. To the intrusion switch: a) Disconnect the intrusion switch cable from the connector on the system board [1]. b) Un-route the intrusion switch cable from the cable holder. c) Slide the intrusion switch and push it to remove from the computer [2]. Installing intrusion switch 1. Insert the intrusion switch into the slot on the computer. 2. Route the intrusion switch cable through the cable holder. 3. Connect the intrusion switch cable to the connector on the system board. 4. Close the front panel door. 5. Install the: a) Front bezel b) Side Cover 6. Follow the procedure in After working inside your computer. Power switch Removing power switch 1. Follow the procedure in Before working inside your computer. 2. Remove the: Field service information 37